網站導航
隴博智能3噸、6噸迷你小型純電折彎機，助力企業降本增效
近日，隴博智能科技有限公司一款具有創新性的3噸和6噸迷你小型純電折彎機在市場上嶄露頭角，為眾多企業解決了成本高、效率低的難題。
該款折彎機的初始采購成本雖較傳統液壓機型高20%-30%，但其全生命周期成本優勢***。以5年使用周期計算，純電機型的能耗成本*為液壓機的1/3，維護成本減少50%，模具損耗降低40%，綜合成本反而低15%-20%。某廚具制造企業在使用3噸純電折彎機加工不銹鋼水槽部件后，單工件加工成本從1.2元降至0.8元，年節省成本超50萬元。
設備還配備了智能故障診斷系統，能實時監測設備狀態并提供詳細的故障診斷信息，幫助維修人員快速定位和解決問題，減少了因設備故障導致的生產中斷損失。此外，其支持智能模具管理，系統自動識別模具類型并加載相應的加工參數，配合快速換模系統，可在1分鐘內完成模具更換和參數切換，**提升了生產靈活性。
目前，這款迷你小型純電折彎機正逐漸受到市場的青睞，為各行業的生產發展注入新動力。
Recently, a pioneering 3-ton and 6-ton mini pure electric bending machine produced by Longbo Intelligent Technology Co., Ltd. has emerged on the market, solving the problems of high costs and low efficiency for many enterprises.
Although the initial purchase cost of this type of bending machine is 20% - 30% higher than that of traditional hydraulic models, its cost advantage throughout the entire life cycle is remarkable. Calculated based on a 5-year usage period, the energy consumption cost of the pure electric model is only one-third of that of the hydraulic machine, the maintenance cost is reduced by 50%, the mold wear is decreased by 40%, and the overall cost is instead 15% - 20% lower. After a kitchenware manufacturing enterprise used a 3-ton pure electric bending machine to process stainless steel sink components, the single-piece processing cost dropped from 1.2 yuan to 0.8 yuan, and the annual cost savings exceeded 500,000 yuan.
The equipment is also equipped with an intelligent fault diagnosis system, which can monitor the equipment status in real time and provide detailed fault diagnosis information. This helps maintenance personnel quickly locate and solve problems, reducing production interruption losses caused by equipment failures. In addition, it supports intelligent mold management. The system automatically identifies the mold type and loads the corresponding processing parameters. Combined with the rapid mold change system, the mold can be replaced and parameters switched within 1 minute, significantly enhancing production flexibility.
At present, this mini compact pure electric bending machine is gradually gaining popularity in the market, injecting new impetus into the production development of
公司信息
訪問官網
我要咨詢
每日熱詞
